AIR SANDBLASTER CABINET 240V 350 LITRE

$1,272 AUD GST Exclusive

($1,399 AUD GST Inclusive)

Seller confirm cost

AIR SANDBLASTER CABINET 240V 350 LITRE Specification

  • Make : WORK HORSE
  • Model : AIR SANDBLASTER CABINET 240V 350 LITRE
  • Condition : New
  • Stock ID : XH-SBC350

Description

AIR SANDBLASTER CABINET 240VOLT WITH AIR FOOT PEDAL OPERATION 2 SIDE DOORS FOR REMOVING JOBS BIG 360 LITRE CABINET

AIR SANDBLASTER CABINET 240V FOOT PEDAL OPERATION

SPECIFICATION:
NATURAL RUBBER/VINYL BLAST GLOVES 600MM LONG
PERFORATED STEEL FLOORING-ABRASIVE
LARGE PARTICLE-SEPARATING SCREEN
SIDE CLEAN-OUT DOORS ON BOTH SIDES OF MACHINE
POWDER COATED INSIDE AND OUTSIDE
AIR REGULATOR SUPPLIED WITH PRESSURE GAUGE ON TOP PANEL
14 GAUGE STEEL LEGS(16 GAUGE PANELS)
ELIMINATING TYPICAL SUCTION PICK-UP TUBES AND HOSES,MEDIA METERING
SERIES BLAST CABINETS IN AN ENTIRELY DIFFERENT CLASS FROM THE COMPETITION.
EXTERNAL FLOURESCENT LIGHTING SYSTEM.
PACKED IN WOODEN CASE.
OVERALL DIMENSION: 1040MM WIDE 920MM DEEP 1650MM HIGH
WORK AREA: 950MM WIDE 605MM DEEP 570MM HIGH
AIR PRESSURE RANGE: 60PSI~120PSI
SAND CAPACITY: APPROX 40LB (18.4KG)
ABRASIVE MEDIA: SILICA SAND, GLASS BEADS, SILICON CARBIDE, EMERY, PLASTIC SAND, ETC.
POWER REQUIREMENT: 240 VOLT,50HZ WITH OUTPUT VOLTAGE: 12 VOLT
DIMENSION: 128CM X 99CM X 76CM

THE SBC350 SANDBLAST CABINET IS LOADED WITH FEATURES NOT FOUND ON OTHERS OF THIS PRICE. THE CONVENIENT TOP CONTROL PANEL FEATURES SWITCHES FOR POWER, LIGHT AND DUST COLLECTOR, A REGULATOR AND PRESSURE GAUGE, AND INDICATOR LIGHTS. THE UNIT COMES WITH 2 BLASTING NOZZLES: A HEAVY-DUTY GUN WITH VALVE, AND A STATIONARY NOZZLE THAT IS CONTROLLED WITH THE FOOT SWITCH. TWO LARGE SIDE DOORS MAKE LOADING AND UNLOADING SIMPLE.

THE SBC350 IS ALWAYS READY WHEN YOU ARE. THE CABINET CAN BE CONSTANTLY CONNECTED TO YOUR AIR SUPPLY AND IS READY FOR IMMEDIATE USE WHEN YOU PULL THE TRIGGER OR STEP ON THE PEDAL. USE YOUR NEW SANDBLAST CABINET TO REMOVE SCALE OR HEAVY RUST FROM AUTOMOTIVE PARTS, CLEAN UP RUSTY TOOLS, ETCH GLASS, OR ANY OTHER SPECIAL APPLICATION.

THE SBC350 INCORPORATES A POWERFUL VACUUM SYSTEM THAT KEEPS THE WORK AREA FREE OF "FLOATING" RUST AND USED GLASS BEAD SHELLS. AFTER THE GLASS BEAD 'SLAMS AGAINST' THE SURFACE TO BE CLEANED, A PORTION OF THE BEAD IS "DESTROYED" AND BECOMES ALMOST WEIGHTLESS. THE VACUUM SYSTEM REMOVES THE "FLOATING" RUST PARTICLES AND THE "USED UP" GLASS BEAD SHELL WHILE THE 'GOOD BEADS' FALL INTO THE HOPPER BELOW THE WORK SURFACE.

THE SBC350 USES A FOOT PEDAL TO CONTROL THE SPEED AND FLOW OF ABRASIVES FROM THE AIR GUN. THE FOOT PEDAL ALLOWS THE OPERATOR TO JUST 'HOLD AND POINT' THE GUN RATHER THAN THE NEED TO 'PULL THE TRIGGER' OF THE SANDBLAST GUN WHICH CAN BE VERY TIRESOME.

FULL LINE OF PARTS AND ACCESSORIES FOR OUR SANDBLAST CABINETS. WE STOCK REPLACEMENT GLOVES, VACUUM MEDIA FILTERS, PEEL-OFF LENSES, BEAD BLAST GUNS AND REPLACEMENT NOZZLES ALONG WITH MANY OTHER WEARABLE SANDBLAST CABINET PARTS.

Contact

0749308000  

Ask a question